Shipping and Freight Resource

FEBRUARY 4, 2020

So everyone in the shipping and freight industry needs to acknowledge and understand that digitalisation is not a buzz word and it is inevitable because sustaining and handling these volumes manually is not possible. Whether digital or manual, the business of shipping involves a lot of documentation. How to avoid these pitfalls.

Supply Chain Planning Software 98

Supply Chain Planning Software Freight Supply Chain Design Software Modeling Software 98

Logistics Business Magazine

MAY 31, 2023

The NORD ECO box can measure the energy consumption of individual drives in detail and allows for extensive data analysis. After installation of the NORD ECO box between the drive and power supply, data covering permanent loads, load peaks and irregular conditions is recorded over a period of two months.

Efficiency 44

Efficiency Cost Reduction Material Savings Document 44

Logistics Viewpoints

DECEMBER 9, 2020

For all but the simplest route planning problems, creating the best plan is not as simple as loading data and hitting the “optimize” button. The more competent route planning organizations do a good job at documenting and enforcing planning best practices.

Supply Chain Planning Software 149

Supply Chain Planning Software Supply Chain Software Scenario Planning Automation 149

Shipping and Freight Resource

JUNE 2, 2020

The statement also calls on all stakeholders to cooperate on the development of platforms for the exchange of data and “smart working” along the entire supply chain, backed up by capacity building initiatives including workforce training and the introduction of enhanced cybersecurity provisions.

Maritime 84

Maritime Logistics Network Optimization Software Supply Chain Software Industry 84

Logistics Business Magazine

FEBRUARY 22, 2023

More than 1,500 exhibitors from Europe, North and South America, Asia, and Africa will present their current portfolios of products, systems, and solutions for efficient intralogistics processes to an international industry audience across 125,000 square meters of the fully booked exhibition centre—7% more exhibit space than last year.

Production 54

Production Optimization Software Logistics Network Optimization Software Resource Reduction 54

Logistics Business Magazine

FEBRUARY 27, 2023

The difficult market situation caused by the geopolitical crises and higher material and energy expenses in almost all business segments presented not only our company but also the entire intralogistics industry with major challenges in 2022,” says Steffen Bersch, CEO of the SSI Schaefer Group.

Material Savings 71

Material Savings Waste Reduction Expense Reduction Price Reduction 71

3PL Insights

OCTOBER 24, 2017

The robots are typically connected to a Robotic Management System (RMS) that integrates data regarding product—what’s high in demand, what needs to be picked and shipped quickly. Metrics: Autonomous vehicles have sensors to automatically gather data, which can be uploaded to various applications, hosted onsite or in the cloud.

Supply Chain Software 112

Supply Chain Software Supply Chain Planning Software Inventory Reduction Expense Reduction 112

Freightera

JULY 7, 2023

The present freight shipping industry demands technical support that can assist with every aspect of freight management. Data from every part of the process needs to be carefully analyzed and evaluated to obtain actionable insights. You must have encountered several challenges while handling freight management and supply chain.

Supply Chain Planning Software 35

Supply Chain Planning Software Logistics Network Optimization Software Supply Chain Software Cost Reduction 35

GlobalTranz

DECEMBER 12, 2014

According to a research study from Forrester, EDI continues to prove its worth as an electronic message data format. For shippers or 3PLs that handle numerous transactions, using EDI, typically within a TMS, can result in millions of dollars of annual savings due to early payment discounts. for an order processed using EDI.

Cost Reduction 98

Cost Reduction Waste Reduction Expense Reduction Inventory Reduction 98

Logistics Bureau

NOVEMBER 20, 2023

Indeed, the transition has taken place so swiftly that some companies may still need to fully grasp the present or future possibilities to exploit distribution performance as a competitive advantage. Big Data and Analytics With the latest analytics technology, you can further refine your fleet’s efficiency and plan more accurately.

Presentation 79

Presentation Optimization Software Logistics Network Optimization Software Optimal Sourcing 79

Blue Grace Logistics

AUGUST 30, 2021

As per the current analysis of Reports and Data , the global refrigerated transport market was estimated at $14.8 The cold chain in logistics is defined as a product handling process that guarantees that all transported goods are kept within a specific temperature range from the production phase to their delivery to the final consumer.

Optimization Software 62

Optimization Software Supply Chain Design Software Supply Chain Software Logistics Network Optimization Software 62

Conger

JULY 6, 2023

Be able to read and interpret forklift data plates. Documentation of training experience. Assessment of presentation and communication skills. Documentations of prior forklift training undertakings in other places. Be familiar with different models of forklifts. Understand the different parts of a forklift. Observations.

Buyer Training 52

Buyer Training Training Material Savings Course 52

Conger

DECEMBER 13, 2022

RF scanners are handheld devices used for automatically entering data about physical items. Radio frequency scanners – or “RF scanners” for short – are electronic devices used to automate data entry of physical items into databases or computer systems so they can be logged, tracked, and managed. Other Names for RF Scanners.

Inventory Reduction 52

Inventory Reduction Modeling Software Expense Reduction Cost Reduction 52

LandLink

DECEMBER 12, 2018

Implementing IOT technology will allow 3pls the ability to communicate directly with the hardware involved in the production and retrieve the necessary data directly rather than deal with personnel. With a connected network, this type of data can be seamlessly retrieved by 3pls and disseminated to suppliers and providers.

Supply Chain Design Software 79

Supply Chain Design Software Supply Chain Software Logistics Network Optimization Software Tracking and Tracing 79

Logistics Viewpoints

JANUARY 11, 2023

Last week, I gave the keynote presentation at the Dangerous Goods Symposium, sponsored by LabelMaster and the DG Exchange. In my presentation, I highlighted five key transportation trends that are changing supply chains from a technology standpoint. The industry’s well-documented labor shortages are not ending anytime soon.

Supply Chain Planning Software 129

Supply Chain Planning Software Supply Chain Design Software Logistics Network Optimization Software Supply Chain Software 129

Shipping and Freight Resource

OCTOBER 22, 2020

As timber is usually shipped in large volumes, there has to be an extremely close coordination between the various parties from the live-loading of the cargo into the container, the carriers, the entities fumigating the containers, and the documentation team that prepares all the pre-shipment and shipment documentation.

Modeling Software 67

Modeling Software Logistics Network Optimization Software Negotiating Skills Production 67

Logistics Business Magazine

JUNE 26, 2020

Ecommerce companies along with manufacturers are the two sectors currently trailblazing the uptake of this technology, but any company, large or small, with a warehouse and requirement for materials handling can benefit – whether they are in retail, apparel, automotive, electronics or third party logistics (3PL).

Logistics Network Optimization Software 63

Logistics Network Optimization Software Material Savings Materials Handling Cost Reduction 63

Logistics Bureau

AUGUST 7, 2023

Simply put, there is no more effective way to ensure accurate ecommerce inventory control than to invest in IM software that can integrate with all your sales channels to provide real-time visibility, centralise inventory data, and automate stock updates.

Inventory Reduction 89

Inventory Reduction eCommerce Inventory Procurement Solutions 89

Forto

JULY 25, 2018

For instance, non-perishable products like apparel, toys and home decor products can be easily packed up and shipped by air or sea without having to worry too much about the handling of the cargo. While these products may require less care, they also yield a lower profit margin. Dangerous goods can be solids, liquids or gases.

Tips 49

Tips Packing Material Savings Document 49

Conger

MAY 28, 2021

How to handle different driving surfaces. That means providing proper documentation and evidence that your employee completed their forklift operator training. Unfortunately, OSHA doesn't specify what the "proper documentation" or "evidence" should look like. So what separates the good documentation from the bad?

Buyer Training 94

Buyer Training Training Course Operations 94

Ship Monk

SEPTEMBER 15, 2022

For this part of the process, proper documentation of what has arrived is key. However, the gist in reference to order fulfillment is that 3PLs handle the receiving, picking, packing, and shipping of online orders on behalf of eCommerce merchants. Having technology in place can also speed up the picking and packing process (i.e.

eCommerce 75

eCommerce Ordering Supply Chain Design Software Supply Chain Planning Software 75

GlobalTranz

JUNE 18, 2015

This presents opportunities for developing new revenue streams, an exciting challenge to logistics professionals. continuous GPS tracking data regarding locations of return goods in relation to causes of delays, and routing adjustments for traffic, road construction, and convoluted routes. Return center.

Reverse logistics 103

Reverse logistics Optimization Software Logistics Network Optimization Software Transportation 103

Shipping and Freight Resource

MARCH 17, 2020

TechTarget defines cyber security as “the body of technologies, practices, and processes designed to protect computers, programs, networks and data from damage, attacks or unauthorized access. What is cyber security and cyber security risk.?? In the context of computing, the term security implies cyber security.”.

Security 74

Security Logistics Network Optimization Software Maritime Operations 74

GlobalTranz

FEBRUARY 27, 2015

Better handling of large transaction volumes. Once we had Infor M3 in place, we discovered a big increase in the transactional volumes we could handle. More accessible data. Data is easier to find and more accessible to senior management. Improved supplier selection based on data-driven performance ratings.

Manufacturing Procurement 110

Manufacturing Procurement ERP Logistics Network Optimization Software Procurement Solutions 110

WorkWave

APRIL 26, 2024

Recreational users are required to present a valid photo ID during delivery to verify their age and identity, while medical patients must show their medical marijuana card. At the time of delivery, customers are required to present a valid ID to verify their eligibility. Stay up-to-date with Nevada cannabis law here.

Optimization Software 52

Optimization Software Logistics Network Optimization Software Procurement Analytics Procurement Solutions 52

Airfreight Logistics

JULY 4, 2018

Bangkok Flight Services is a joint venture between Worldwide Flight Services and Bangkok Airways, providing a range of cargo handling services. Currently, BFS is able to handle up to four hundred thousand tons of cargo per year, and despite their strong service offerings, the company has not stopped developing new tools and services.

Logistics Network Optimization Software 47

Logistics Network Optimization Software Eliminating Excel in Purchasing Procurement Solutions Cargo 47

Ship Monk

JANUARY 30, 2023

Make sure your fulfillment center also knows exactly how to handle returns, refunds, and reshipments. Your fulfillment center or 3PL should be able to handle the returns and reshipments, as well as claims processing to recover costs from shipping carriers. Whether the delay is caused by weather, transit issues, labor shortages, etc.

eCommerce 52

eCommerce Supply Chain Planning Software Inventory Reduction Supply Chain Software 52

Forto

MARCH 17, 2020

After all, it is also about the customer’s business, which comes under pressure if its partners don’t present options for action. . We all access Google Drive, which makes it easier for us to collaborate on documents at the same time. The customer in turn was able to pass on the updated arrival data to his colleagues.

Logistics Network Optimization Software 52

Logistics Network Optimization Software Modeling Software Supply Chain Software Logistics 52

Automotive Logistics

APRIL 15, 2019

Elsewhere, VW is using AR goggles to present digitalised training information about a variety of procedures that apprentices can quickly access as they are working – something the company says should help to foster self-teaching skills and enable trainees to adapt their learning behaviour to conditions at the plant. Vision picking.

Supply Chain Design Software 54

Supply Chain Design Software Supply Chain Planning Software Modeling Software Supply Chain Software 54

Logistics Business Magazine

MARCH 18, 2024

Companies aiming to improve their competitiveness through more highly automated intralogistics will find everything they need from a single source at Linde Material Handling (MH): a broad portfolio of automated guided vehicles (AGVs) and mobile robots (AMRs), suitable for projects ranging from small to large and simple to complex.

Automation 48

Automation Modeling Software Logistics Network Optimization Software Materials Handling 48

Logistics Business Magazine

MARCH 20, 2018

BluJay Solutions presents the three most important trends to prepare for in 2018. . Reliable track-and-trace and hassle-free handling of complaints or returns are taken for granted. However, the basic prerequisite for this is that the software is adopted throughout the entire supply chain in order to process the new data.

Supply Chain Design Software 29

Supply Chain Design Software Supply Chain Planning Software Supply Chain Software Modeling Software 29

Automotive Logistics

APRIL 26, 2018

Vehicle handling ports in Europe and the companies providing services to them have been dealing with a lot of challenges over the past 12 months. The UK’s departure from the EU is a cause of both concern and hope to ports there, as it is for those handling transhipment volumes on the continent. Where to put it all .

Negotiating Skills 44

Negotiating Skills Logistics Network Optimization Software Handling Purchasing Skills 44

GlobalTranz

APRIL 5, 2016

Although each of these needs has always been present, many shippers were able to achieve these feats through in-house solutions. However, a growing omnichannel, e-commerce market share is making shippers look to squeeze every drop from data-rich environments to leverage capabilities and services to reduce costs to the end-user.

Negotiating Skills 55

Negotiating Skills Logistics Network Optimization Software 3PL Purchasing Skills 55

Logistics Business Magazine

OCTOBER 26, 2021

More than 150 researchers are working on an open-source software and hardware infrastructure that enables companies to process their business operations in an automated way and to offer and use services and data securely across different platforms beyond company boundaries.

Logistics Network Optimization Software 53

Logistics Network Optimization Software Supply Chain Planning Software Modeling Software Supply Chain Software 53

Tradewinds

OCTOBER 8, 2018

Union Crate helps CPG brands and retailers unify supply chain data and make it digestible for supply and demand forecasting. Vector AI automates trade documentation and identifies key parameters to help streamline the trade finance process from data gather through to underwriting and funding. a big thank you to them!

Supply Chain Design Software 20

Supply Chain Design Software Supply Chain Planning Software Supply Chain Software Logistics Network Optimization Software 20

CLX Logistics

AUGUST 23, 2023

Chemical manufacturers, particularly those operating domestically or within the same continent, frequently opt for road and rail transportation due to their inherent flexibility in handling volatile materials and safety and sustainability advantages.

Optimal Sourcing 95

Optimal Sourcing Outsourcing Material Savings Optimization Software 95

Conger

JUNE 9, 2023

Here are some examples of forklift tip-over example situations: Improper Load Handling and Overloading Overloading is one of the top causes of forklift tip-overs Incorrectly handling loads is a key cause of forklift tip-overs. Always adhere to the forklift-rated weight located on the forklift data plate.

Tips 52

Tips Training Maintainability Trucking 52