Conger

FEBRUARY 8, 2024

Are you trying to decide between equipment refurbishment or reconditioning? This article is your ultimate guide to equipment refurbishment vs reconditioning. We also answer some frequently asked questions about equipment refurbishment vs reconditioning. So, what is equipment refurbishment ? Let’s dive in!

Cost Reduction 52

Cost Reduction Purchasing Skills Eliminating Excel in Purchasing Material Savings 52

WorkWave

AUGUST 11, 2022

Take a look at our list here: PSI GPM Motor Pump Type Hose Size Weight Wheel Size. The engine also comes equipped with a built-in low oil shutdown feature to protect the pressure washer and ensure it will keep working for you for a long time. The premium 13-inch pneumatic tires make transporting it over a variety of terrains very easy.

Modeling Software 52

Modeling Software Eliminating Excel in Purchasing Tips Expense Reduction 52

Conger

FEBRUARY 20, 2024

Regular maintenance helps identify and address problems such as worn-out brakes, faulty steering, or malfunctioning features. Imagine the risk of operating a forklift with worn-out brakes. If the brakes fail during operation, it may cause collisions, property damage, or harm to individuals. If not, make adjustments as needed.

Maintainability 52

Maintainability Modeling Software Manufacturing Procurement Optimization Software 52

Conger

FEBRUARY 28, 2024

The guidelines outline best practices for forklift operation, including training requirements , certification, equipment maintenance, and operational methods. Those operating forklifts must be aware of the load capacity of their equipment and adhere to it. Avoid driving lifts toward individuals who are sitting or standing nearby.

Buyer Training 52

Buyer Training Material Savings Training Maintainability 52

Conger

JUNE 9, 2023

A forklift tip-over is any situation where a forklift's wheels leave the ground A tip-over is when a forklift becomes unstable and rolls over on its side, backward, or forwards. The stability triangle is an imaginary 3D pyramid between the center of the forklift’s rear axle and both wheels of the front axle.

Tips 52

Tips Training Maintainability Trucking 52

GlobalTranz

JULY 5, 2017

If you’ve made the jump to operating your own equipment, then you need to know a few things about how to maintain these road beasts. Check Tire Pressure Weekly. Pay attention to both the inboard and outboard wheels on every axle. Changes in temperature can have major effects on your tires, causing them to over or under-inflate.

Tips 55

Tips Trucking Temperature Blog 55

Logistics Business Magazine

JUNE 29, 2020

With its all-wheel drive and all-terrain soft tyres, it is the undisputed leader among the multidirectional sideloaders when it comes to outdoor use. Even on uneven ground, the vehicle functions flawlessly thanks to the all-wheel drive and elastic tires.

Modeling Software 51

Modeling Software Optimization Software Optimization Modeling Factories 51

GlobalTranz

AUGUST 16, 2017

An overload can cause the rear tires to be raised off the ground and may cause the forklift to tip over. Fully lower the forks to the floor and apply the park brake. Tire condition and pressure including cuts and gouges. READ Driving after less than five hours sleep is as dangerous as being drunk behind wheel.

Tips 66

Tips After-sales Training Blog 66

GlobalTranz

JUNE 3, 2015

For many types of loads, particularly those that are not sealed or otherwise inaccessible to the driver, regulations require the driver to stop within the first several miles of a trip and recheck the tie downs and other load securing equipment. It is a 37-step procedure that includes an examination of both the driver and vehicle.

Events 67

Events Security Cargo Document 67

Conger

FEBRUARY 22, 2023

Besides the actual models, you’ll also learn key information about each, like: Lifting capacities Fuel types Applications Key features, advantages, and benefits Let’s dive in!

Modeling Software 52

Modeling Software Optimization Modeling Modeling Manufacturing Procurement 52

Conger

FEBRUARY 5, 2024

There’s a lot to consider such as carrying capacity, lifting height, type of motor, tire composition, and operator ergonomics. What types of forklift tires will your machine need? You can also check if you have the proper maintenance equipment, such as charging devices and storage for an electric forklift.

Eliminating Excel in Purchasing 52

Eliminating Excel in Purchasing Manufacturing Procurement Purchasing Skills Negotiating Skills 52

Conger

JUNE 15, 2022

The Material Handling Equipment Distributors Association (MHEDA) “recommends a max speed of 8 mph in general and a 3 mph max speed in high pedestrian traffic areas.". But many businesses set their forklift speed limit at 5 mph, particularly if working around pedestrians, forklifts, or other equipment. 1910.178(n)(15).

Material Savings 52

Material Savings Cost Reduction Tips Training 52

Conger

OCTOBER 22, 2021

Aerial lifts help people and equipment reach levels of heights that they or other types of machines cannot reach. Install wheel chocks if the manufacturer allows. Weight limits for aerial lifts include the operator, tools, equipment, and supplies on the platform. Inspecting the wheels and tires.

Tips 52

Tips Operations Buyer Training Training 52

Fleet Owner

DECEMBER 8, 2021

Goodyear intelligent sensors and prototype tires will be used to fuel extra energy savings for SARTA hydrogen-powered buses.

60

60

Fleet Owner

JANUARY 15, 2022

President and CEO Jeff Barna as well as Stan Chandgie, EVP of sales, discuss trends in the tire industry.

Trends 60

Trends Industry 60

Conger

DECEMBER 3, 2021

Safety Equipment: What’s All Part of It? The wheels and tires. The front wheels act as the fulcrum - or balancing point. So any weight ahead of the front wheels needs to be balanced by weight behind the wheels. Common components in the operator compartment include: Steering Wheel. Forklift Wheels.

Tips 52

Tips Capacity Handling Trucking 52

Conger

FEBRUARY 22, 2023

Order Pickers vs. Other Equipment Order Picker Types Order Pickers Features Order Picker Manufacturers Order Picker Prices: What Can You Expect to Pay? All order pickers are electric, with either 24, 36, or 48-volt power systems They usually have 1 centered drive wheel and then a series of non-powered casters behind or in front of the unit.

Definition 52

Definition Ordering Modeling Software Picking 52

Conger

OCTOBER 19, 2021

Safety is an important factor to consider when operating scissor lifts, like with any other equipment. A scissor lift is a piece of equipment with a rising and lowering platform that’s used to move personnel vertically. More specifically, they’re mobile scaffolding equipped with a platform that only moves vertically.

Modeling Software 52

Modeling Software Training Manufacturing Procurement Optimal Sourcing 52

Conger

FEBRUARY 11, 2022

And here’s a simple pallet jack definition: A pallet jack (sometimes called a “pallet truck”) is the simplest type of forklift, consisting of a: Wheeled trolley. Load wheels. Pallet jacks support the load on their wheels. Instead, the weight is fully supported on wheels at both ends. Hydraulic pump. A 2,500 lb.

Definition 52

Definition Modeling Software Price Reduction Handling 52

IoT World Today

JULY 22, 2019

Mobile Resource Management Systems Market Study” that about 13 million devices enabled with GPS and wireless connectivity are deployed today to manage fleet vehicles, trailers, equipment and field service workers across a variety of industry verticals. are equipped with a telematics system. You can get video to monitor the load.

Video 84

Video Trucking Study Temperature 84

Conger

FEBRUARY 11, 2022

In addition, the load wheels on these lift trucks can pivot from side to side. capacity Toyota 3-wheel electric forklift can travel 9.9 Base legs are the components that connect to the reach truck’s chassis and contain the load wheels. Counterbalance forklifts - depending on the tire type - can operate indoors or outdoors.

Trucking 52

Trucking Buyer Training Training Modeling Software 52

GlobalTranz

AUGUST 9, 2016

Rather, focus on productivity: trailer utilization, total miles ran, equipment waiting time (which is pure waste) and adherence to core carrier routing guides. These losses provide a clue as to why nearly all fuel tanker trucks and trailers are equipped with super-single tires instead of the standard dual variety.

Waste Reduction 53

Waste Reduction Cost Reduction Inventory Reduction Price Reduction 53

Conger

JUNE 7, 2021

You’ll also have several different load types to handle, from tires and pallets to shipping containers. We’re impressed by the nicely designed controls, including a realistic forward/reverse travel lever, steering wheel, and gas/brake pedals. No support for steering wheel accessory. No longer supported by developers.

Video 52

Video Price Reduction Picking Handling 52

247 Customs Broker

FEBRUARY 6, 2018

For some, that the chassis is new with good tires is enough. With GPS, we actually have a digital odometer for each chassis, so we can leverage that information to be proactive on maintenance and inspection programs, instead of reactively responding to equipment failure,” he said.

Supply Chain Design Software 28

Supply Chain Design Software Supply Chain Planning Software Logistics Network Optimization Software Modeling Software 28

Conger

MARCH 25, 2022

You can get rid of a forklift in several ways, including selling it yourself, recycling it in a scrap yard, keeping it for spare parts, or trading it into an equipment dealership. And the forklift’s hour meter is located on the dashboard, near the steering wheel and hydraulic controls. How Do You Read Forklift Hours? Operator Behavior.

Purchasing Skills 52

Purchasing Skills Cost Reduction Trucking Maintainability 52