FreightWaves SONAR

APRIL 8, 2021

Data represents an integral part of daily life for most people, and it is no different within the transportation industry. That insight into how freight logistics and optimization rely on data and understanding the full picture is critical to making the best improvements in supply chain route optimization too.

Optimization Software 98

Optimization Software Optimization Data Supply Chain Planning Software 98

WorkWave

DECEMBER 8, 2023

What are inbound and outbound logistics? Both inbound and outbound logistics involve the transportation of products across various distribution channels, however inbound logistics deals with supply and outbound logistics fulfill demands. This guide outlines the essential KPIs you should be monitoring to ensure efficiency.

Inbound 52

Inbound Optimal Sourcing Logistics Network Optimization Software Inventory Reduction 52

FreightWaves SONAR

MARCH 15, 2021

Advancements in tender data science and paid market data now power SONAR SCI (Supply Chain Intelligence) Lane Acuity Plus. In the screenshot above, you can see that the outbound and inbound stability show scores of 29 out of 100 and 21 out of 100, respectively. WHAT IS LANE ACUITY PLUS?

Optimal Sourcing 98

Optimal Sourcing Procurement Analytics Procurement Solutions Procurement 98

FreightWaves SONAR

MARCH 5, 2021

The freight brokerage industry has traditionally focused its attention on the training and development of its customer sales staff. Should] you just figure out if it should be 5% or 6% [without data]?” Using these tools can allow carrier representatives to book more loads and maximize the full potential of your carrier networks.

Negotiating Skills 98

Negotiating Skills Modeling Software Sourcing Strategies Logistics Network Optimization Software 98

FreightWaves SONAR

FEBRUARY 24, 2021

The freight transportation industry has always been slow to adopt new advances in tools, software and automation. However, 2020 helped shed light on just how behind the industry is compared to others. Prioritizing moves based on inbound and outbound data trends. Industry expert guidance as a best practice.

White Paper 52

White Paper Cost Reduction Price Reduction Supply Chain Software 52

Logistics Viewpoints

OCTOBER 10, 2022

spoke on best practices on supply chain risk management at ARC Advisory Group’s Digital Transformation in Industry conference. Autoliv is the world’s largest safety system supplier in automotive industry. Autoliv is the largest supplier of safety systems to the automotive industry. The implementation was not trivial.

Supply Chain Planning Software 134

Supply Chain Planning Software Supply Chain Software Supply Chains Optimal Sourcing 134

Logistics Business Magazine

OCTOBER 16, 2023

Populated with industry-specific insights, the solution leverages a combination of quantum computing, advanced analytics and artificial intelligence (AI) to drive business outcomes. Those who attend will have the opportunity to see a demonstration of the solution and hear from industry leaders.

Optimization Software 61

Optimization Software Optimization Modeling Optimization Inventory Reduction 61

Logistics Viewpoints

MARCH 23, 2022

I am continuing to work on my latest Transportation Execution and Visibility Systems study, which looks at the total size of the market, the forecasted growth through 2026, and the leading suppliers across a number of categories including industry, region, customer size, and mode. Real-Time Visibility Data.

Modeling Software 128

Modeling Software Logistics Network Optimization Software Supply Chain Software Survey 128

FreightWaves SONAR

SEPTEMBER 29, 2023

Even during times when the industry is described as “a shipper’s market,” figuring out what to expect has proven difficult at best. The disruption forced many industries around the globe into a sonic-class boom of growth. The supply chain is everywhere and affects every industry on the planet.

Cost Reduction 52

Cost Reduction Negotiating Skills Resource Reduction Capacity 52

Logistics Business Magazine

FEBRUARY 23, 2024

Red Bull’s Formula One HQ in Milton Keynes is an appropriate and impressive backdrop to learn why data is fuel in logistics. High performance in logistics can be maintained by extracting insights from data and taking practical steps. Complexity requires having a data strategy.” The quality and timeliness of data is crucial.”

Logistics Network Optimization Software 53

Logistics Network Optimization Software Supply Chain Software Supply Chain Planning Software Supply Chain Design Software 53

Logistics Business Magazine

OCTOBER 26, 2020

Smart attachments like Ravas iForks demonstrate how to shift forklift value away from mere materials handling and in the direction of data sampling. Smart logistics and Industry 4.0 have created an ever-growing demand for data input as a tool to optimise supply chains and reach required profit levels.

Logistics Network Optimization Software 51

Logistics Network Optimization Software Supply Chain Software Waste Reduction ERP 51

20Cube Logistics

JANUARY 28, 2020

Technology is fast evolving and so is its adoption by vast industries like supply chain where it is been used more creatively and expansively. RFID is a tool to read & understand digital data encrypted in RFID tags through a reader via radio waves. Easy reports and advanced data analysis . What’s RFID?

RFID 74

RFID Supply Chain Software Supply Chain Planning Software Optimization Software 74

FreightWaves SONAR

DECEMBER 15, 2020

A lack of data is the absolute villain in this scenario for brokers and all trading parties. Gather data for the analysis. Additionally, integrations into telematics for real-time data or connecting via IOT-enabled sensors bridge the disparities in various network assets, including equipment and individual pallets.

Analysis 59

Analysis Procurement Analytics Optimization Software Optimal Sourcing 59

SYSPRO Smarter ERP

SEPTEMBER 8, 2021

The industrial equipment and machinery (IM&E) industry needs to start looking at solutions that will handle change in key elements of the supply chain, production operations, and shipment activities without being disrupted. This requires looking at the digital tools that will be required to support them.

Supply Chain Planning Software 115

Supply Chain Planning Software Supply Chain Design Software ERP Manufacturing Procurement 115

FreightWaves SONAR

MARCH 22, 2021

The WRI combines outbound tender market share (OTMS) and the weekly change in tender rejection rates (OTRIW). For example Atlanta’s OTMS value is 4% and outbound rejections increased from 3% to 5% over the past seven days. Various market participants in the freight industry can rely on the WRI heatmaps in different use cases.

Capacity 98

Capacity Demo Price Reduction Cost Reduction 98

Logistics Viewpoints

JANUARY 19, 2021

By doing this, you can run a day or a week in the life of your operation and get back data on its performance capability. Areas can include: In- and outbound workflows. Then you can run different scenarios over a similar seven-day period, against the data you have collected, to create an accurate “compare and contrast” picture.

Supply Chain Software 95

Supply Chain Software Modeling Software Optimization Software Logistics Network Optimization Software 95

FreightWaves SONAR

JANUARY 5, 2021

Let’s look at seven ways that freight technology and data achieves that goal. Freight data reduces dwell time and load time. Dwell time remains one of the biggest issues facing the industry in terms of expenses and time utilization. Data-driven processes streamline shipping. Operating Ratio.

Cost Reduction 106

Cost Reduction Waste Reduction Expense Reduction Price Reduction 106

Logistics Business Magazine

DECEMBER 10, 2021

As adoption of in-transit visibility has become a must-have, the focus has mainly been on outbound transportation visibility, improving customer satisfaction and delivery accuracy. Existing Transporeon customers will automatically benefit from the integration of the Ocean Visibility data feed into their transport planning and execution.

Supply Chain Planning Software 82

Supply Chain Planning Software Logistics Network Optimization Software Supply Chain Software Optimal Sourcing 82

GlobalTranz

JANUARY 17, 2019

The Guide to Proactive Inbound, Outbound, and Reverse Enterprise Parcel Management. As implementation time and costs continue to fall, the move to the cloud is easier than, however, there are still some things to keep in mind as the industry moves beyond multi-carrier shipping systems of the past and into the future. Download Here.

Logistics Network Optimization Software 70

Logistics Network Optimization Software Cost Reduction Material Savings White Paper 70

Ship Monk

AUGUST 22, 2022

In our eCommerce fulfillment blog we sometimes highlight industry jargon that’s essential for every entrepreneur. SKUs provide sellers and the 3PL fulfillment centers that they work with invaluable data about sales and inventory management. There are online tools as well, and you can create SKUs by hand. What are SKUs Used for?

Inventory Reduction 52

Inventory Reduction eCommerce Inventory 3PL 52

Transporeon

FEBRUARY 12, 2019

And just in time: We’ve seen some interesting bidding trends over the last year or so, especially in the domestic trucking industry, where: 2017-2018’s lack of trucking capacity—a large part of shippers’ bidding activity—meant shippers went to bid not only earlier, but in much greater volume than previous years (a 15% YOY increase in 2018).

Optimization Software 48

Optimization Software Modeling Software Logistics Network Optimization Software Optimal Sourcing 48

Transporeon

FEBRUARY 12, 2019

And just in time: We’ve seen some interesting bidding trends over the last year or so, especially in the domestic trucking industry, where: 2017-2018’s lack of trucking capacity—a large part of shippers’ bidding activity—meant shippers went to bid not only earlier, but in much greater volume than previous years (a 15% YOY increase in 2018).

Optimization Software 48

Optimization Software Modeling Software Logistics Network Optimization Software Optimal Sourcing 48

GlobalTranz

JUNE 22, 2017

Thus, retailers must manage the whole process, including inbound and outbound freight, as an extension of the shopping experience. Customers’ Data Is Being Created, And It Requires Integration. Depending on your industry, you must create a unique shopping experience for every customer.

Supply Chain Design Software 78

Supply Chain Design Software Supply Chain Software Supply Chain Design Supply Chains 78

GlobalTranz

MARCH 24, 2015

Given that our proprietary TMS, the Cerasis Rater , provides multiple reports, giving our shippers’ many insights, this post is quite appropriate, just like getting the data that is meaningful , in order to make the best decisions for your business possible. . Outbound freight costs as percentage of net sales. Truckload – $1.51

Purchasing Skills 94

Purchasing Skills Cost Reduction Analysis Procurement Analytics 94

Ship Monk

APRIL 20, 2023

The 3PL must invest in electronic data interchange (EDI) compliant technology required by most large retailers, as well as the technology integrations required by large marketplaces such as Amazon FBA. Our B2B fulfillment tools help growing brands quickly master the complex challenges of retail distribution and wholesale fulfillment.

Logistics Network Optimization Software 77

Logistics Network Optimization Software Supply Chain Design Software Optimization Software Supply Chain Software 77

AIMMS

JANUARY 24, 2019

Our analytics department is comprised by data scientists who work on developing AI models, as well as OR specialists who focus on Supply chain optimization, simulation and mathematical programming. I have about eight years of experience in the industry, in both operations and analytics roles. . Can you tell us about your goals? .

Optimal Sourcing 116

Optimal Sourcing Supply Chain Software Optimization Software Supply Chain Planning Software 116

FreightWaves SONAR

MARCH 18, 2021

Managing the manufacturing supply chain and freight markets of today requires skills, tools, applications and services that have never been utilized in the past. So, it’s equally valuable to know the constraints and to apply data to overcome them with mini-bids. Download the White Paper.

Manufacturing Procurement 91

Manufacturing Procurement Supply Chain Planning Software Supply Chain Software Supply Chains 91

CH Robinson Logistics

FEBRUARY 18, 2022

TMS systems work with all types of freight: inbound, outbound, customer pickup, international, ocean, air, full truckload, less than truckload (LTL), rail, barge, parcel, flatbed, specialized equipment, and intermodal. A TMS reduces time by supplying digital tools that simplify the freight management process. Efficiency.

Supply Chain Planning Software 62

Supply Chain Planning Software Optimization Software Supply Chain Software Modeling Software 62

CLX Logistics

APRIL 26, 2019

The year 2018 was challenging for shippers in all industries, including chemical, due to capacity constraints in the marketplace that inflated costs. The good news is, shippers have more access to data than ever before, which brings us to trend number two. Hiring Data Scientists or Third-Parties to Analyze Data.

Optimal Sourcing 51

Optimal Sourcing Negotiating Skills Procurement Cost Reduction 51

Conger

JULY 22, 2021

You can track data about the latest orders, shipments, or any other activity on your inventory. Does the system allow you to access real-time data whenever needed? Not only that, but Skubana also provides predictive analytics to give you valuable data. It allows you to access real-time customer, order, and inventory data.

Supply Chain Design Software 52

Supply Chain Design Software Supply Chain Planning Software eCommerce Logistics Network Optimization Software 52

Penske Move Ahead

NOVEMBER 15, 2021

The National Private Truck Council 2021 Benchmarking Survey Report provides fleets with new industry standards to evaluate performance and identify opportunities for improvement. Fleet operators need real-time data to make informed decisions about their business. We can process the data and optimize it in several ways.

Survey 57

Survey Trucking Supply Chain Software Logistics Network Optimization Software 57

GlobalTranz

APRIL 25, 2017

3PLs Leverage Technology and Data to Improve Operations. The concept of actionable intelligence is about using technology and software to ensure company goals reflect industry strategy and demands. This involves the combination of data capture, analytic and dashboarding tools to make decisions easier.

Supply Chain Software 62

Supply Chain Software Cost Reduction Resource Reduction Vendor Strategies 62

Ship Monk

OCTOBER 17, 2022

Do they have strong software and IT capabilities for managing mass supply chain data? A 3PL gives eCommerce brands extra tools to balance the different operational demands of their businesses. More “old school” 3PLs may rely on manual data pushes from their accounts. Technology is at the crux of advancement in any industry.

eCommerce 80

eCommerce 3PL Logistics Network Optimization Software Supply Chain Design Software 80

GlobalTranz

JANUARY 17, 2018

Manufacturers are looking for ways to explore new technologies, reinvent manufacturing strategy, enhance troubleshooting, bringing manufacturing closer to consumer and levy the power of intelligent tools to streamline operations and cut costs. Demand for Data Scientists Familiar with Manufacturing Will Increase.

Manufacturing Procurement 58

Manufacturing Procurement Cost Reduction Resource Reduction Trends 58

AIMMS

JANUARY 24, 2019

Our analytics department is comprised by data scientists who work on developing AI models, as well as OR specialists who focus on supply chain optimization, simulation and mathematical programming. I have about eight years of experience in the industry, in both operations and analytics roles. . Can you tell us about your goals? .

Optimal Sourcing 62

Optimal Sourcing Supply Chain Software Optimization Software Supply Chain Planning Software 62

Trinity Logistics

APRIL 12, 2022

They want to cut any obstacles drivers may face on the road while having any data be transparent to help both them and ultimately, any customers. They make sure to get real-time data to those who need it should meaningful decisions need action, and have secondary and tertiary backups available. Produce inspection tool.

Supply Chain Planning Software 104

Supply Chain Planning Software Logistics Network Optimization Software Supply Chain Design Software Supply Chain Software 104

Logistics Bureau

JANUARY 18, 2021

Business benchmarking is seen as one of the smartest management tools around. How does your performance rate against industry standards? 8) Know Your Data. This is where we look at all the transactional value data and information that’s coming in, such as: What we’re receiving. What are your rivals doing?

Supply Chain Design Software 118

Supply Chain Design Software Supply Chain Design Operations Supply Chain Planning Software 118