LM    Topics     Logistics    3PL

ISM reports February manufacturing gains but coronavirus impact looms


While the coronavirus continues to have to global economy on edge, manufacturing output grew in January, for the second straight month, following a five-month stretch of declines, according to data issued by the Institute for Supply Management (ISM) in its Manufacturing Report on Business, which was issued today.

The report’s key metric—the PMI—checked in at 50.1 (a reading of 50 or higher indicates growth) in February, down 0.8% from January’s 50.9 reading. January was 3.1% ahead of December, which marked the lowest PMI reading going back to June 2000’s 46.3. The overall economy grew in February for the 130th consecutive month. The February PMI is 0.4% below the 12-month average of 50.5.

ISM reported that 14 of the 18 manufacturing sectors it tracks saw growth in February, including: Food, Beverage & Tobacco Products; Plastics & Rubber Products; and Computer & Electronic Products. The nine industries reporting a decrease in employment in February, in the following order, are: Petroleum & Coal Products; Paper Products; Primary Metals; Textile Mills; Transportation Equipment; Machinery; Miscellaneous Manufacturing; Fabricated Metal Products; and Chemical Products. Six industries reported no change in February compared to January.

The report’s key metrics were mixed in February.

New orders, which are commonly referred to as the engine that drives manufacturing, fell 2.2% to 49.8, on the heels of a 4.4% gain in January to 52.0 (its highest reading since July 2019’s 51.1), which snapped a five-month stretch of declines. The five-month stretch of declines prior to January was preceded by 43 consecutive months of growth over which time it had a cumulative average of 58.5. Sixteen of the 18 manufacturing sectors in the report saw gains in February new orders.

Production—at 50.3—fell 4% below January’s 54.3, which halted five months of declines, for its best reading since April 2019, which also came in at 54.3, with 12 of the 18 manufacturing sectors reporting growth in February. Employment eked out a 0.3% increase to 46.9, slowing for the seventh consecutive month, with three manufacturing sectors reporting employment growth. Supplier deliveries—at 57.3 (a reading above 50 indicates contraction)—marked a 4.4% downward difference from January to February, slowing at a faster rate for the fourth straight month.

February inventories—at 46.5—fell 2.3% to 46.5, down for the ninth consecutive month. This represented the lowest level since September 2019, when it came in at 46.3. Customer inventories—at 41.8—slipped 2%, falling for the 41st consecutive month, and backlog of orders—50.3—headed up 4.6%, showing growth after a nine-month stretch of declines.

The coronavirus was a prevalent theme in comments submitted in the report by ISM respondents.

“There are always supply chain challenges with Lunar New Year shutdowns, and this year is no different,” said a computer & electronic products respondent. “Coronavirus is wreaking havoc on the electronics industry. Companies are delayed in starting up production, which is resulting in longer lead times, constraints and increased pricing. It's a mad dash to dual source stateside in case China isn't back online soon.”

A food, beverage, and tobacco products respondent said coronavirus is impacting supply chain operations, with softness in demand, coupled with experiencing havoc on items sourced from China that may cause significant delays to production. And a fabricated metal products respondent observed that coronavirus is front and center as a major supply chain risk, with access to information in China, from the respondent’s supply base and customers, “slow to come by.”

In an interview, Tim Fiore, Chair of the ISM’s Manufacturing Business Survey Committee, said February was a stable month for manufacturing, from the standpoint of demand and consumption, relative to January.

“It was essentially the same demand outputs [new orders, customers’ inventories, and backlog of orders] that we had seen in January,” he said. “The input side [supplier deliveries, inventories, and imports] was a bigger story and contributed positively to the PMI, offsetting the negativity from the declining expansion numbers for demand in consumption [production and employment] from January. That was primarily driven by the supplier delivery number that clearly indicates suppliers are having more difficulty delivering. The story is that everything is moving very fast, and timing of information is critical.”

What’s more, Fiore said that the manufacturing sector has transitioned from a price-impacting tariff-counter tariff environment to a supply-access issue environment that is much more dangerous for the economy than tariffs were. The reason for this, he explained, was that tariffs are financial and manufacturers still had their source of supply if they wanted, but they just had to pay more.

“This situation is more around ‘what I do know and what I don’t know and what am I going to do about it,’” he said. “It is very dynamic. Forty two percent of our comments [in the report] were cornonavirus-related, and 18% were from respondents already experiencing issues, and 24% of them were people who were expecting issues, including companies that could not get information; that is a pretty dramatic number, up from 2.5% in January.”

And he added that manufacturing is currently facing input-driven impacts around coronavirus, primarily in China, with the expectation that this month that will spread out to probably Europe and that is expected to show up in the report’s demand numbers in April through June.

“If we don’t get anything new on this by mid-April, I could see Q3 and Q4 be pretty good growth quarters,” he said.  

But he noted that this comes with the caveat there could be a backlog for industrial products, with consumer products potentially translating to empty shelves by April. That is driven by the timing of the Lunar New Year and the full end of demand to support the fact that factories were off for two weeks.

“If the quantity of people that are infected is not capped out by mid-April and we don’t see that number start to come down in the areas that are being impacted significantly, then it is going to a large scale impact for the whole supply chain,” he said.

In addition to that, Fiore cited three related factors from the report, including:

  • import are at their lowest level in many years—at 42.6—down nearly 9% from January, indicating there are supply chain issues;
  • prices fell almost 8% to 45.9; and
  • the backlog of orders number jumping up to over 50, at 50.3, which Fiore says supports the fact that manufacturers did not have everything they needed ship the products they could ship, which, in turn, drove down the customers’ inventories number down

Article Topics

News
Logistics
3PL
Transportation
3PL
Institute for Supply Management
ISM
Logistics
manufacturing
PMI
Transportation
   All topics

3PL News & Resources

April Services PMI contracts after 15 months of growth, reports ISM
2023 industrial big-box leasing activity heads down but remains on a steady path, notes CBRE report
Q1 U.S. Bank Freight Payment Index sees shipment and spending declines
Ryder opens up El Paso-based multi-client facility logistics facility
April manufacturing output takes a step back after growing in March
TIA rolls out updated version of framework focused on fighting freight fraud
National diesel average is down for the third consecutive week, reports EIA
More 3PL

Latest in Logistics

April Services PMI contracts after 15 months of growth, reports ISM
2023 industrial big-box leasing activity heads down but remains on a steady path, notes CBRE report
U.S. rail carload and intermodal volumes are mixed in April, reports AAR
Q1 U.S. Bank Freight Payment Index sees shipment and spending declines
S&P Global Market Intelligence’s Rogers assesses 2024 import landscape
Pitt Ohio exec warns Congress to go slow on truck electrification mandates
Q1 intermodal volumes are up for second straight quarter, reports IANA
More Logistics

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

May 2024 Logistics Management

May 2, 2024 · As the days of slow, invisible supply chains that “worked behind the scenes” continue to fade in the rearview mirror, companies are improving their demand forecasting, gaining real-time visibility across their networks and streamlining their operations—and its software that makes that all possible.

Latest Resources

Warehouse/DC Automation & Technology: Time to gain a competitive advantage
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of the automated systems and related technologies that are revolutionizing how warehouse and DC operations work.
The Ultimate WMS Checklist: Find the Perfect Fit
Reverse Logistics: Best Practices for Efficient Distribution Center Returns
More resources

Latest Resources

2024 Transportation Rate Outlook: More of the same?
2024 Transportation Rate Outlook: More of the same?
Get ahead of the game with our panel of analysts, discussing freight transportation rates and capacity fluctuations for the coming year. Join...
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Bypassing the Bottleneck: Solutions for Avoiding Freight Congestion at the U.S.-Mexico Border
Find out how you can navigate this congestion more effectively with new strategies that can help your business avoid delays, optimize operations,...

Driving ROI with Better Routing, Scheduling and Fleet Management
Driving ROI with Better Routing, Scheduling and Fleet Management
Improve efficiency and drive ROI with better vehicle routing, scheduling and fleet management solutions. Download our report to find out how.
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...